source: experiments/frams/foraminifera/data/scripts/foraminifera.expdef @ 496

expdef:
name:Reproduction of benthic foraminifera
info:~
Basic information about this simulation:
www.framsticks.com/foraminifera

Technical information:
Genes and parameter values which control reproduction are stored in data->genes and data->lifeparams fields.

genes:
genes which are not encoded in Ff genotype:
min_repro_energy - Minimum energy necessary for reproduction
hibernation - Defines foram behavior in the case of no nutrients

lifeparams:
Physiological parameters of foraminifera:
max_energy_level - maximum energy level reached so far
gen - generation: 0 haploid, 1 diploid
species - species: 0 not hibernating 1 hibernating
hibernated - 0/1 foram is/isn't hibernated
reproduce - 0/1 foram isn't/is ready for reproduction 
~
code:~

global chambers;
global colors;
global retColors;
global curColor;
global dir_change_sec;
global max_chamber_volume;
global movePerStep;
global nutrientenergywaiting;
global o;
global reprocounter;
global changePeriod;
global phase;
global nutrientSqrCm;
global species_genes; 

@include "foraminifera.inc"

// -------------------------------- experiment begin --------------------------------

function onExpDefLoad()
{
        // define genotype and creature groups
        GenePools.clear();
        Populations.clear();
        GenePools[0].name = "Unused";

        var pop = Populations[0];
        pop.name = "Forams";
        pop.en_assim = 0;
        pop.nnsim = 0;
        pop.enableperf = 1;
        pop.death = 1;
        pop.energy = 1;
        pop.selfmask = 0;
        pop.othermask = 0;
        //pop.selfmask = 0x20002; pop.othermask = 0x10002;
        pop.perfperiod = 25; 
        pop.bodysim = 0;

        pop = Populations.addGroup("Nutrients");
        pop.nnsim = 0;
        pop.enableperf = 0;
        pop.death = 1;
        pop.energy = 1;
        pop.selfmask = 0;
        pop.othermask = 0;
        //pop.othermask = 0x10002;
        pop.bodysim = 0;

        pop = Populations.addGroup("ReticulopodiaNutrients");
        pop.nnsim = 0;
        pop.enableperf = 0;
        pop.death = 0;
        pop.energy = 0;
        pop.selfmask = 0;
        pop.othermask = 0;
        pop.bodysim = 0;

        //world
        SignalView.mode = 1;
        World.wrldwat = 200;
        World.wrldsiz = micronsToFrams(100000);
        World.wrldbnd = 1;
        ExpProperties.stress = 1;
        ExpProperties.creath = -0.99; //just above the bottom
        ExpProperties.autorestart = 0;

        //time
        ExpProperties.secPerStep = 480;
        ExpProperties.foramSpeedMmPerMin = 0.05;
        movePerStep = getMovePerStep();

        //ExpProperties.visualize = 1; //uncomment to visualize reticulopodia and indicate nutrients positions

        //ExpProperties.logging = 1; //uncomment to enable logging simulation parameters to log files   
        ExpProperties.logPref = "";

        //reproduction
        ExpProperties.foramPop = 20;    
        ExpProperties.crossprob = 0;
        ExpProperties.mutationprob = 0;
        ExpProperties.repro_time = 720;
        ExpProperties.gametoPeriod = 21600;
        ExpProperties.divisionCost = 15.6;
        reprocounter = 0;

        species_genes = [];

        init_chambers();

        curColor = retColors[0];
        //morphology
        dir_change_sec = 30000;
        ExpProperties.zone1_range = micronsToFrams(1000);
        ExpProperties.zone2_range = micronsToFrams(3000);
        ExpProperties.chamber_growth_time = 720;
        ExpProperties.chamberCostPerSec = 0.000001;
        ExpProperties.chamber_proculus_haplo = micronsToFrams(50);
        ExpProperties.chamber_difference_haplo = 0.0;
        ExpProperties.chamber_proculus_diplo = micronsToFrams(20);
        ExpProperties.chamber_difference_diplo = micronsToFrams(8);

        max_chamber_volume = [Vector.new(), Vector.new()];
        for (var j = 0; j < 2; j++)
        {
                for (var i = 0; i < chambers[0].size; i++)
                {
                        max_chamber_volume[j].add(((volumeInMicrons(getProperty(j, "chamber_proculus")) + volumeInMicrons(getProperty(j, "chamber_proculus") + (i) * getProperty(j, "chamber_difference")))*(i+1))/2);  
                }                                  
        }

        //energetics
        ExpProperties.min_repro_energ_haplo = 4;
        ExpProperties.min_repro_energ_diplo = 6;

        ExpProperties.e_meta = 0.0000005; 
        ExpProperties.energy_hib = 0.0000001;
        ExpProperties.energy_move = 0.0000005;

        ExpProperties.energies0_haplo = 20;
        ExpProperties.energies0_diplo = 1.25;
        ExpProperties.feedtrans = 0.001;
        ExpProperties.e_repro_cost_haplo = 0.3; 
        ExpProperties.e_repro_cost_diplo = 0.2;

        ExpProperties.e_death_level_haplo = 0.5;
        ExpProperties.e_death_level_diplo = 0.5;

        //nutrients
        changePeriod = 0;
        phase = "low";
        nutrientSqrCm = 10;
        ExpProperties.foodperiod = 25920;
        ExpProperties.foodPeriodChange = 6;
        ExpProperties.nutrientradius = micronsToFrams(10);
        ExpProperties.energy_nut = energyFromVolume(ExpProperties.nutrientradius,1);
        ExpProperties.nutrient_pop = Math.pow(framsToMicrons(World.wrldsiz)*0.0001,2)/nutrientSqrCm;
        ExpProperties.ingestion = 0.25;
        nutrientenergywaiting = 0;
        ExpState.totaltestedcr = 0;
        ExpState.nutrient = "";
        
        //addSpecies({"min_repro_energies" : [4,6]});
        //addSpecies({"min_repro_energies" : [4,8]});
}

@include "standard_placement.inc"

function volumeInMicrons(radiusInFrams)
{
        return 4.0/3.0*Math.pi*Math.pow(framsToMicrons(radiusInFrams),3);
}

function energyFromVolume(base, isRadiusInFrams)
{
        if (isRadiusInFrams == 1) //radius in frams
        {
                return ExpProperties.picoCarbonPerMikro*volumeInMicrons(base);
        }
        else //volume in microns
        {
                return ExpProperties.picoCarbonPerMikro * base;
        }
}

function getMovePerStep()
{
        return micronsToFrams((ExpProperties.foramSpeedMmPerMin/60)*1000)*ExpProperties.secPerStep;
}

function micronsToFrams(micrometers)
{
        return micrometers*0.01;
}

function framsToMicrons(framsworldunits)
{
        return framsworldunits/0.01;
}

function getProperty(gen, prop_id)
{
        var ploid = "haplo";
        if (gen == 1) ploid = "diplo";
        return ExpProperties.[prop_id + "_" + ploid];
}

function getGene(cr, gen_id, gen_set)
{
        if (cr.data->lifeparams->gen == 0) 
                return cr.data->genes[gen_id];
        else 
                return cr.data->genes[gen_set][gen_id];
}

function addForam(species, iter, chambernum, ploid)
{
        var geno = createForamMorphology(ploid, ploid, chambernum);
        curColor = retColors[ploid];
        var cr = Populations[0].add(geno);
        cr.name = "Initial creature" + species + "_" + iter;
        placeCreatureRandomly(cr, 0, 0);
        cr.energy0 = energyFromVolume(max_chamber_volume[ploid][chambernum],0);
        cr.energy = cr.energy0;
        setGenotype({"opt" : 0, "cr" : cr, "species" : species, "energy0" : cr.energy0, "genes" : species_genes[species]});
        if (ploid == 1)
        {
                cr.data->lifeparams->gen = 1;
                cr.data->genes = [cr.data->genes, cr.data->genes]; //TODO two different genes sets
        }
}

function addInitialForam(species, iter)
{
        var ploid = 0;
        if (Math.rnd01 > 0.5)
        {
                ploid = 1;
        }       
        //add new foram with random energy bewtween starting energy and reproduction threshold
        addForam(species, iter, int(Math.rndUni(0,species_genes[species]->min_repro_energies[ploid])),ploid);
}

//new species can be added as a dictionary with parameter values that are different than default values
function addSpecies(new_genes)
{
        species_genes.add({"min_repro_energies" : [ExpProperties.min_repro_energ_haplo,ExpProperties.min_repro_energ_diplo], "energies0" : [ExpProperties.energies0_haplo, ExpProperties.energies0_diplo], "hibernation" : 0, "morphotype" : 0});
        for (var i = 0; i < new_genes.size; i++)
        {
                var key = new_genes.getKey(i);
                species_genes[species_genes.size-1][key] = new_genes[key];
        } 
}

function onExpInit()
{
        Populations[0].clear();
        Populations[1].clear();
        Populations[2].clear(); //reticulopodia and nutrients

        if (species_genes.size == 0)
        {
                addSpecies({}); //default
        }

        for (var spec = 0; spec < species_genes.size; spec++)
        {
                for (var i = 0; i < ExpProperties.foramPop; i++)
                {
                        addInitialForam(spec, i);       
                }
        }
        o = Populations[0][0].getMechPart(0).orient.clone();
        ExpState.totaltestedcr = 0;
}

function onExpLoad()
{
        for (var pop in Populations)
                pop.clear();

        Loader.addClass(sim_params.*);
        Loader.setBreakLabel(Loader.BeforeUnknown, "onExpLoad_Unknown");
        Loader.run();

        Simulator.print("Loaded " + Populations[0].size + " Forams and " + Populations[1].size + " nutrient objects");
}

function onExpLoad_Unknown()
{
        if (Loader.objectName == "org") // saved by the old expdef
        {
                var g = Genotype.newFromString("");
                Loader.currentObject = g;
                Interface.makeFrom(g).setAllDefault();
                Loader.loadObject();
                var cr = Populations[0].add(g);
                if (cr != null)
                {
                        //cr.rotate(0,0,Math.rnd01*Math.twopi);
                        if ((typeof(g.data->genes) == "Vector") && (g.data->genes.size >= 3))
                        {
                                // [x,y,energy]
                                cr.move(g.data->genes[0] - cr.center_x, g.data->genes[1] - cr.center_y, 0);
                                cr.energy = g.data->genes[2];
                        }
                        else
                        {
                                cr.move(Math.rnd01 * World.wrldsiz - cr.center_x, Math.rnd01 * World.wrldsiz - cr.center_y, 0);
                        }
                }
        }
        else if (Loader.objectName == "Creature")
        {
                Loader.currentObject = CreatureSnapshot.new();
                Loader.loadObject();
                Populations[0].add(Loader.currentObject);
        }
}

function onExpSave()
{
        File.writeComment("saved by '%s.expdef'" % Simulator.expdef);

        var tmpvec = [], i;

        for(var cr in Populations[1])
                tmpvec.add([cr.center_x, cr.center_y, cr.energy]);

        ExpState.nutrient = tmpvec;
        File.writeObject(sim_params.*);
        ExpState.nutrient = null; //vectors are only created for saving and then discarded

        for (var cr in Populations[0])
                File.writeObject(cr);
}

// -------------------------------- experiment end --------------------------------

// -------------------------------- foram begin -----------------------------------

function setForamMeta(cr)
{
        //percent of current energy
        cr.idleen = (ExpProperties.e_meta * cr.energy)*ExpProperties.secPerStep;
}

function lastChamberNum(cr)
{
        return cr.numparts-1;
}

function getZoneRange(cr, zone_num)
{
        return ExpProperties.["zone"+zone_num+"_range"];
}

function onForamsBorn(cr)
{
        setForamMeta(cr);
        if (ExpProperties.visualize == 1)
        {
                var ret = Populations[2].add("//0\np:sh=3,sx=0.01,sy="+getZoneRange(cr,1)+",sz="+getZoneRange(cr,1)+",ry=1.57,vr="+curColor);
                cr.data->reticulopodiacreature = ret;
                ret.moveAbs(cr.center_x-getZoneRange(cr,1), cr.center_y-getZoneRange(cr,1), cr.center_z-getZoneRange(cr,1));
        }
}

function placeRandomlyNotColliding(cr)
{
        var retry = 100; //try 100 times
        while (retry--)
        {
                placeCreatureRandomly(cr, 0, 0);
                if (!cr.boundingBoxCollisions(0))
                        return cr;
        }

        Populations[0].delete(cr);
}

function visualization(cr)
{
        var has_ret = 0;

        if (cr.data->reticulopodiacreature != null)
        {
                if (Populations[2].findUID(cr.data->reticulopodiacreature.uid) != null)
                {
                        has_ret = 1;
                }
        }

        return has_ret;
}

function foramGrow(cr, chamber_num)
{
        if ((chamber_num+1) < chambers[cr.data->lifeparams->species].size)
        {
                curColor = retColors[cr.data->lifeparams->gen];
                var geno = createForamMorphology(cr.data->lifeparams->gen, cr.data->lifeparams->gen, chamber_num+1);
                var cr2 = Populations[0].add(geno);

                cr2.energy0 = cr.energy;
                cr2.energy = cr2.energy0;

                setGenotype({"cr" : cr2, "parent_genes" : cr.data->genes, "parent_lifeparams" : cr.data->lifeparams, "opt" : 2, "energy0" : cr.energy0});
                cr2.moveAbs(cr.center_x - cr2.size_x / 2, cr.center_y - cr2.size_y / 2, cr.pos_z);
                setForamMeta(cr2);

                if (visualization(cr))
                {
                        Populations[2].delete(cr.data->reticulopodiacreature);
                }
                Populations[0].delete(cr);
        }
}

function stepToNearest(cr)
{
        var p = cr.getMechPart(0);
        var n = cr.signals.receiveSet("nutrient", getZoneRange(cr,2));

        //if signals are received find the source of the nearest
        if (n.size > 0)
        {
                var i;
                var mp;
                var distvec = XYZ.new(0, 0, 0);
                var dist;
                var mindist = 100000000000.0;
                var mindistvec = null;
                var eating = 0;

                for (i = 0; i < n.size; i++)
                {
                        mp = n[i].value.getMechPart(0);
                        distvec.set(mp.pos);
                        distvec.sub(p.pos);
                        dist = distvec.length;
                        if (dist < getZoneRange(cr,1))
                        {
                                if (n[i].value != null)
                                {
                                        energyTransfer(cr, n[i].value);
                                        eating = 1;
                                }
                        }
                        else if (eating == 0 && cr.data->lifeparams->hibernated == 0 && dist < mindist)
                        {
                                mindist = dist;
                                mindistvec = distvec.clone();
                        }
                }

                if (!eating && cr.data->lifeparams->hibernated == 0)
                {
                        mindistvec.normalize();
                        mindistvec.scale(-1*movePerStep);
                        cr.localDrive = mindistvec;
                        moveEnergyDec(cr);
                }

                return 1;
        }
        
        else
        {
                return 0;
        }
}

function moveEnergyDec(cr)
{
        if (cr.data->lifeparams->hibernated == 0)
        {
                //percent of maximal energy
                cr.energy_m += (ExpProperties.energy_move * cr.data->lifeparams->max_energy_level)*ExpProperties.secPerStep;
        }
}

function fence(pos, zone)
{
        return Math.min(Math.max(0,pos),World.wrldsiz);
}

function foramMove(cr)
{
        //TODO moving inside sediment?

        //adjustment in z axis
        cr.moveAbs(fence(cr.pos_x, getZoneRange(cr, 1)), fence(cr.pos_y,getZoneRange(cr, 1)), 0);

        //are there any nutrients in zone 1 or 2?
        {
                var moved = stepToNearest(cr); //TODO weighted sum of distance and energy
                if (moved==1)
                { 
                        return;
                }
        }

        //no nutrients in zone 2
        if (getGene(cr, "hibernation",0) == 1)
        {
                reverseHib(cr);
                cr.localDrive = XYZ.new(0,0,0);
        }
        //random move
        else if (Simulator.stepNumber%int(dir_change_sec/ExpProperties.secPerStep) == 0)
        {
                cr.data->lifeparams->dir = randomDir();
                cr.localDrive = cr.data->lifeparams->dir;
                moveEnergyDec(cr);
        }
        else
        {
                cr.localDrive = cr.data->lifeparams->dir;
        }
}

function randomDir()
{
        var dir = (Math.rndUni(-ExpProperties.zone2_range, ExpProperties.zone2_range), Math.rndUni(-ExpProperties.zone2_range, ExpProperties.zone2_range), 0);  
        dir.normalize();
        dir.scale(-1*movePerStep);
        return dir;
}

function energyTransfer(cr1, cr2)
{
        cr1.localDrive = XYZ.new(0,0,0);
        var e =  ExpProperties.feedtrans*cr1.energy;//ExpProperties.feedtrans*cr1.energy*ExpProperties.ingestion*ExpProperties.secPerStep; //TODO efficiency dependent on age
        e = Math.min(cr2.energy, e);
        e *= ExpProperties.secPerStep;
        //Simulator.print("transferring "+e +"("+e*ExpProperties.ingestion+")"+" to "+cr1.name +" ("+ cr1.energy+") " +" from "+cr2.name+" ("+cr2.energy+") "+ e/ExpProperties.secPerStep+ " per sec");
        cr2.energy_m = cr2.energy_m + e + 0.0000001;
        cr1.energy_p = cr1.energy_p + e*ExpProperties.ingestion;
        if (cr1.data->lifeparams->hibernated == 1)
        {
                reverseHib(cr1);
        }
}

function reverseHib(cr)
{
        if (cr.data->lifeparams->hibernated == 1)
        {
                setForamMeta(cr); //unhibernate
        } 
        else
        {
                cr.idleen = (ExpProperties.energy_hib * cr.energy)*ExpProperties.secPerStep; //hibernate
        }
        cr.data->lifeparams->hibernated = 1 - cr.data->lifeparams->hibernated;
}

function createLogVector(cr, value)
{
        var vec = Vector.new();
        for (var i = 0; i < species_genes.size; i++)
        {
                for (var j = 0; j < 2; j++)
                {
                        vec.add(0);
                }
                if (cr.data->lifeparams->species == i)
                {
                        vec[i*2+cr.data->lifeparams->gen] = value;              
                }
        }
        return vec;
}

function onForamsStep(cr)
{
        //checking for gametogenesis process
        if (cr.data->lifeparams->division_time > 0)
        {
                cr.data->lifeparams->division_time = Math.max(cr.data->lifeparams->division_time-1,0);
        }
        //checking for end of gametogenesis
        else if (cr.data->lifeparams->division_time == 0)
        {
                //waiting for gamets fusion
        }
        //checking for chamber growth process
        else if (cr.data->lifeparams->chamber_growth > 0)
        {
                cr.data->lifeparams->chamber_growth = Math.max(cr.data->lifeparams->chamber_growth-1,0);
                //Simulator.print("chamber growing, time left = " + cr.data->lifeparams->chamber_growth*ExpProperties.secPerStep);
                cr.energy_m += ExpProperties.chamberCostPerSec * cr.energy * ExpProperties.secPerStep;

                //Simulator.print("energy " + cr2.energy + " subtracting " + growth_cost);
        }
        //checking for end of chamber growth process
        else if (cr.data->lifeparams->chamber_growth == 0)
        {
                foramGrow(cr, lastChamberNum(cr)); 
                cr.data->lifeparams->chamber_growth = -1;
                //Simulator.print("chamber "+ (lastChamberNum(cr) + 1) +" complete");
        }
        else
        {
                //update of metabolism rate
                if (cr.data->lifeparams->hibernated == 0)
                {
                        setForamMeta(cr);
                }

                cr.getMechPart(0).orient.set(o);

                if (deathConditions(cr) == 1)
                {
                        if (ExpProperties.logging == 1)
                        {
                                log(createLogVector(cr, cr.data->lifeparams->max_energy_level),ExpProperties.logPref+"fossil_log.txt");
                        }                       
                        Populations[0].kill(cr);
                        return;
                }

                foramMove(cr);

                if (visualization(cr))

                {
                        cr.data->reticulopodiacreature.moveAbs(cr.center_x-getZoneRange(cr,1), cr.center_y-getZoneRange(cr,1), cr.center_z-getZoneRange(cr,1));
                }

                var repro = foramReproduce(cr);
                if (repro == 1)
                {
                        return;
                }

                cr.data->lifeparams->max_energy_level = Math.max(cr.energy, cr.data->lifeparams->max_energy_level);

                //cheking conditions of chamber growth process start
                if  (lastChamberNum(cr) != chambers[0].size-1)
                {
                        if ((cr.data->lifeparams->max_energy_level >= energyFromVolume(max_chamber_volume[cr.data->lifeparams->gen][lastChamberNum(cr)],0)))    
                        {
                                cr.data->lifeparams->chamber_growth = int(ExpProperties.chamber_growth_time/ExpProperties.secPerStep);
                        }       
                }
        }       
}

function deathConditions(cr)
{
        if ((cr.energy <= getProperty(cr.data->lifeparams->gen,"e_death_level")*cr.data->lifeparams->max_energy_level) || (Math.rnd01 < ExpProperties.hunted_prob))
        {
                return 1;
        }
        else
                return 0;
}

function onForamsDied(cr)
{
        if (visualization(cr))
        {
                Populations[2].delete(cr.data->reticulopodiacreature);
        }
        //fossilization
        var geno = GenePools[0].add(cr.genotype);
        geno.data->genes = cr.data->genes;
        geno.data->lifeparams = cr.data->lifeparams;
        if (ExpProperties.logging == 1) Simulator.print("\"" + cr.name + "\" died...");
        ExpState.totaltestedcr++;
}

// --------------------------------foram end -------------------------------------

// -------------------------------- nutrient begin --------------------------------

function createNutrientGenotype(nutrientradius)
{
        return "//0\np:sh=3,sx="+nutrientradius+",sy="+nutrientradius+",sz="+nutrientradius+",ry=1.5,vr=0.0,1.0,0.0";
}

function onNutrientsStep(cr)
{
        cr.moveAbs(cr.pos_x % World.wrldsiz, cr.pos_y % World.wrldsiz, 0.5);
}

function addNutrient()
{
        var cr = Populations[1].add(createNutrientGenotype(ExpProperties.nutrientradius));

        cr.name = "Nutrients";
        cr.idleen = 0;
        cr.energy0 = ExpProperties.energy_nut;
        cr.energy = cr.energy0;
        cr.signals.add("nutrient");

        cr.signals[0].value = cr;

        placeCreatureRandomly(cr, 0, 0);
        if (ExpProperties.visualize == 1)
        {
                var nutsize = ExpProperties.nutrientradius*10;
                var nut = Populations[2].add("//0\np:sh=2,sx="+nutsize+",sy="+nutsize+",sz="+nutsize+",ry=1.5,vr=0.0,1.0,0.0");
                cr.data->reticulopodiacreature = nut;
                nut.moveAbs(cr.pos_x-1.5*nutsize, cr.pos_y-1.5*nutsize, 0.5);
        }
}

function onNutrientsDied(cr)
{
        if (visualization(cr))
        {
                Populations[2].delete(cr.data->reticulopodiacreature);
        }
}

function nutrientGrowth()
{
        if (ExpProperties.foodPeriodChange > 0)
        {
                        changePeriod += 1;
                        if (phase=="low" && (changePeriod*ExpProperties.secPerStep) >= 23328000) //9 months
                        {
                                ExpProperties.foodperiod = ExpProperties.foodperiod/ExpProperties.foodPeriodChange;
                                phase = "high";
                                changePeriod = 0;
                        }
                
                        else if (phase == "high" && (changePeriod*ExpProperties.secPerStep) >= 7776000) //3 months
                        {
                                ExpProperties.foodperiod = ExpProperties.foodperiod*ExpProperties.foodPeriodChange;
                                phase = "low";
                                changePeriod = 0;
                        }
        }
        nutrientenergywaiting = nutrientenergywaiting + 1;
        if (nutrientenergywaiting*ExpProperties.secPerStep >= ExpProperties.foodperiod)
        {
                for (var i = 0; i < ExpProperties.nutrient_pop; i++)
                {    
                        addNutrient();
                }

                nutrientenergywaiting = 0.0;
                Simulator.checkpoint();

                if (ExpProperties.logging == 1)
                {
                        log([ExpProperties.nutrient_pop],ExpProperties.logPref+"nutrients_log.txt");
                }
        }

}

// -------------------------------- nutrient end --------------------------------

// -------------------------------- step begin --------------------------------

function onStep()
{

        nutrientGrowth();
        if (ExpProperties.logging == 1)
        {
                createStatistics();
        }

        //reproduction --------------------------------------------
        reprocounter += 1;
        if (reprocounter*ExpProperties.secPerStep > ExpProperties.repro_time)
        {
                reprocounter = 0;
                reproduce_parents(0);
                reproduce_parents(1);
        }

        //check for extinction -----------------------------------------------
        if (Populations[0].size == 0)
        {
                if (ExpProperties.autorestart)
                {
                        Simulator.print("no more creatures, restarting...");
                        onExpInit();
                }
                else
                {
                        Simulator.print("no more creatures, stopped.");
                        Simulator.stop();
                }
        }
        if (ExpProperties.maxSteps > 0)
        {
                if (Simulator.stepNumber >= ExpProperties.maxSteps)
                        Simulator.stop();
        }
}

function createStatistics()
{       
        var number = [];
        var e_inc = [];
        var e_nut = 0.0;

        for (var s = 0; s < species_genes.size; s++)
        {
                number.add([0,0]);// [haplo][diplo]
                e_inc.add([0,0]);
        }

        for (var i = 0; i < Populations[0].size; i++)
        {
                var cr = Populations[0].get(i);
                var gen = cr.data->lifeparams->gen;
                var species = cr.data->lifeparams->species;

                number[species][gen] = number[species][gen] + 1; 
                e_inc[species][gen] = e_inc[species][gen] + cr.energy;
        }

        for (var i = 0; i < Populations[1].size; i++)
        {
                var cr = Populations[1].get(i);
                e_nut += cr.energy;
        }

        var log_numbers = [];
        var log_energies = [];

        for (var s = 0; s < species_genes.size; s++)
        {
                for (var p = 0; p < 2; p++)
                {
                        log_numbers.add(number[s][p]);
                        log_energies.add(e_inc[s][p]);
                }
        }
        
        log_numbers.add(Populations[1].size);
        log_energies.add(e_nut);

        log(log_numbers, ExpProperties.logPref+"forams_log.txt");
    log(log_energies,  ExpProperties.logPref+"energies_log.txt");
}

function log(tolog, fname)
{
        var f = File.appendDirect(fname, "forams data"); 
        f.writeString("" + Simulator.stepNumber);
        for (var  i = 0; i < tolog.size; i++)
        {
                f.writeString(";" + tolog[i]);
        }
        f.writeString("\n");
        f.close();
}

// -------------------------------- step end --------------------------------
//TODO default params values in frams instead of microns/seconds

@include "standard_events.inc"

~

property:
id:visualize
name:Show reticulopodia and nutrients
type:d 0 1 0
group:Foraminifera

property:
id:maxSteps
name:Stop after the given number of simulation steps
type:d 0 1000000 0

property:
id:logPref
name:Log prefix
type:s

property:
id:foramSpeedMmPerMin
name:Speed of foraminfera in mm/min
type:f 0.1
flags: 16
group:Foraminifera

property:
id:gametSuccessRate
name:Ratio of successful gamets
type:f 0.001
group:Foraminifera

property:
id:gametoPeriod
name:Time of gametogenesis
type:f 720
group:Foraminifera

property:
id:picoCarbonPerMikro
name:Picograms of carbon in cubed micrometer
type:f 0.13
group:Foraminifera

property:
id:secPerStep
name:Seconds per simulation step
type:f 60.0
flags: 16
group:Foraminifera

property:
id:e_repro_cost_haplo
name:Cost of reproduction
type:f 0.1 0.9 0.5
group:Foraminifera

property:
id:divisionCost
name:Cost of division in pG
type:f
group:Foraminifera

property:
id:e_repro_cost_diplo
name:Cost of reproduction
type:f 0.1 0.9 0.3
group:Foraminifera

property:
id:chamber_growth_time
name:Time of the chamber growth in seconds
type:f
group:Foraminifera

property:
id:chamberCostPerSec
name:Cost of growning chamber per second
type:f
group:Foraminifera

property:
id:chamber_proculus_haplo
name:Size of proculus
type:f
group:Foraminifera

property:
id:chamber_proculus_diplo
name:Size of proculus
type:f
group:Foraminifera

property:
id:chamber_difference_haplo
name:Difference in size between subsequent chambers
type:f
group:Foraminifera

property:
id:chamber_difference_diplo
name:Difference in size between subsequent chambers
type:f
group:Foraminifera

property:
id:hunted_prob
name:Probability of being hunted
type:f 0 1 0
group:Forminifera

property:
id:zone1_range
name:Zone 1 range 
type:f 0 200
group:Foraminifera

property:
id:zone2_range
name:Zone 2 range
type:f 0 3000
group:Foraminifera

property:
id:colors
name:Haploid and diploid colors
type:x
group:Foraminifera

property:
id:min_repro_energ_haplo
name:Min reproduction energy of forams
type:f
group:Foraminifera

property:
id:min_repro_energ_diplo
name:Min reproduction energy of forams
type:f
group:Foraminifera

property:
id:repro_prob
name:Probability of reproduction
type:f 0 1 0.8
group:Foraminifera

property:
id:energies0_haplo
name:Energy of offspring from diploid forams
type:f
group:Foraminifera

property:
id:energies0_diplo
name:Energy of offspring from diploid forams
type:f
group:Foraminifera

property:
id:e_death_level_haplo
name:Minimal level of energy to sustain life of haploid
type:f 0 20 0.2
group:Foraminifera

property:
id:e_death_level_diplo
name:Minimal level of energy to sustain life of diploid
type:f 0 20 0.2
group:Foraminifera

property:
id:energy_hib
name:Energy used for hibernation during one step
type:f 0 1 0.001
group:Foraminifera

property:
id:energy_move
name:Energy used for movement during one step
type:f 0 20 0.001
group:Foraminifera

property:
id:min_vol
name:Minimal volume for reproduction
type:f 100 900 100
group:Foraminifera

property:
id:max_size
name:Maximal size
type:d 1 10 5 
group:Foraminifera

property:
id:foramPop
name:Initial forams population size
type:d 1 1000 100
group:Foraminifera

property:
id:crossprob
name:Crossover probability
type:f 0 1 0
group:Foraminifera

property:
id:mutationprob
name:Mutation probability
type:f 0 1 0
group:Foraminifera

property:
id:e_meta
name:Idle metabolism
type:f 0 1
group:Energy
help:Each stick consumes this amount of energy in one time step

property:
id:nutrient_pop
name:Feeding rate
type:f 0 1000000
group:Energy
help:How fast energy is created in the world

property:
id:foodPeriodChange
name:Set variable feed rate
type:f 0
group:Energy

property:
id:ingestion
name:Ingestion rate
type:f
group:Energy

property:
id:energy_nut
name:Nutrient energy
type:f 0 10000000
group:Energy

property:
id:feedtrans
name:Energy transfer per second
type:f 0 100000
group:Energy

property:
id:foodperiod
name:Time between food occurrences
type:f 0 1000000
group:Energy

property:
id:nutrientradius
name:Nutrient size
type:f 0.001 0.9 0.1
group:Energy

property:
id:stress
name:Environmental stress
type:d 0 1 1
group:World

property:
id:repro_trigger
name:Reproduction trigger
type:d 0 1 1
group:World

property:
id:repro_time
name:Time before reproduction
type:d 0 10000

property:
id:creath
name:Creation height
type:f -1 50
help:~
Vertical position (above the surface) where new Forams are revived.
Negative values are only used in the water area:
  0   = at the surface
-0.5 = half depth
-1   = just above the bottom~

state:
id:nutrient
name:Nutrient locations
help:vector of vectors [x,y,energy]
type:x
flags:32

property:
id:autorestart
name:Restart after extinction
help:Restart automatically this experiment after the last creature has died?
type:d 0 1

state:
id:notes
name:Notes
type:s 1
help:~
You can write anything here
(it will be saved to the experiment file)~

state:
id:totaltestedcr
name:Evaluated Forams
help:Total number of the Forams evaluated in the experiment
type:d
flags:16

property:
id:logging
name:Log statistics to file
type:d 0 1 0